How to identify replacement caravan and motorhome wheel spats

Caravan Panels · Buying guide

The right replacement wheel spat starts with the part on your caravan or motorhome, not just the badge on the vehicle. Compare its full outline, measurements, side and fixing arrangement before ordering.

Wheel spats are the shaped exterior trims around the wheel opening, also described as wheel-arch trims. This guide helps you identify a replacement; it is not a removal or installation manual.

The quick rule: similar-looking wheel spats are not automatically interchangeable. Match the outline, wheel opening, profile and fixing details, and confirm any uncertainty before buying or altering a part.

1. Record your vehicle and wheel layout

Note the caravan or motorhome manufacturer, exact model, year and any safely visible part reference. For a motorhome, include the conversion brand and model as well as the base vehicle if known. Do not select a body trim solely from the chassis badge.

Record whether the trim surrounds one wheel opening or extends across a twin-wheel layout. Match the actual part rather than assuming that a label such as “single”, “double” or “twin” confirms compatibility. Product numbers such as “001” are listing references, not vehicle model years.

2. Confirm which side you need

Describe the side as left or right when seated in the vehicle facing forwards. Include a photo showing the part's position on the vehicle and mark the front and rear of the trim on your sketch.

If a listing uses nearside or offside, confirm that its terminology matches your vehicle and required side. Do not assume that opposite-side parts are identical, reversible or mirror images that can be swapped.

3. Use this measurement checklist

Write measurements in millimetres on a labelled sketch. Compare straight-line measurements with straight-line measurements, not a tape length taken around a curve.

  • Overall length: measure end to end, including any extended tabs or end sections. Note your measuring points.
  • Overall height: record the highest and lowest points, and label the baseline used.
  • Wheel opening: record the opening's width and height separately from the outer dimensions. Note curves, flat sections and changes of shape.
  • Trim width: measure the visible band at several labelled points, particularly across the top and at each end.
  • Projection and returns: record accessible depth away from the body and any edges that turn inwards. Mark hidden details as unconfirmed.
  • Fixing positions: note the number and location of visible holes or tabs. Measure hole centres from labelled edges and centre to centre where accessible.
  • Adjoining panels: show how the ends meet side skirts, mouldings or other bodywork.

Measure only what you can safely access with the vehicle parked securely. Do not crawl beneath an unsupported vehicle or disturb a damaged or loose panel just to measure it. If a part is broken or distorted, identify which measurements are estimates. Photographs are not scale drawings.

4. Compare the complete shape, not just the arch

Swift caravan wheel spat with a curved opening, broad upper section and extended ends
Swift Caravan Wheel Spat 001 illustrates why the outer ends and upper profile matter as well as the opening. Shown as an example, not a confirmed fit for your caravan.

Compare the front and rear ends, moulded ridges, corners, fixing recesses and the shape above the wheel opening. A close match in overall length does not establish a matching body profile.

Autocruise motorhome wheel spat with a broad upper arch and moulded end sections
Autocruise Motorhome Wheel Spat 001 is a motorhome example. Compare the end mouldings and full outline with your existing part; the photograph alone does not confirm compatibility.

5. Check material, colour and supplied fittings

Read each product's stated material and whether it is an original or aftermarket replacement. Do not assume every wheel spat in a manufacturer range uses the same construction.

Check the finish and colour for the particular listing. Ageing and previous repairs can affect the appearance of surrounding bodywork, so ask about the finish if matching is important. A screen photograph is not a reliable colour sample.

Confirm whether screws, caps or other fittings are included. The Swift Caravan Wheel Spat 001 listing, for example, states that screws and caps are supplied; that does not establish what comes with another wheel spat.

6. Resolve fitting questions before altering the part

Do not assume a replacement arrives pre-drilled, that all existing fixing holes align or that trimming is permitted. Ask about the exact product's fixing, drilling, trimming and sealing requirements before buying if these points are unclear.

Have a competent installer check damaged mounting points, adjoining bodywork and the required clearances. Do not use a replacement trim to conceal an unresolved tyre-contact or bodywork problem. Check fit and condition before painting, drilling, cutting or permanently fixing the part.

7. Send a useful photo pack

Take a side-on view showing the complete trim on the vehicle, close-ups of both ends and the upper edge, and photos of visible fixing positions and any part number. Show adjoining side skirts and mouldings. Include a tape measure for context and send the written measurements separately.

If the original spat is missing, send clear photos of the opening and surrounding panels. An opposite-side part can provide useful reference, but do not assume it confirms the missing part's shape or dimensions.

Before you order: your comparison pack

Keep the vehicle make, model and year; required side; wheel layout; labelled sketch; photographs; any part reference; and the candidate product link together. Mark damaged, missing or inaccessible details as unconfirmed.

Contact Caravan Panels with this information for help narrowing down the options. Ask about the specific wheel spat rather than relying on a general manufacturer match.

Find your replacement wheel spat

For motorhomes, browse Motorhome Wheel Spats. For a caravan example range, browse Swift Caravan Wheel Spats; if your caravan is another make, contact us with its details rather than assuming Swift fitment.

Shortlist by vehicle and wheel layout, compare measurements and shape, then confirm the side and fixing details. A careful comparison now is better than discovering a mismatch after alteration.

Back to blog